On This Page

Home / Edge/ Sending Data/Filesystem/NFS

Filesystem/NFS

Filesystem is a non-streaming Destination type that Cribl Edge can use to output files to a local file system or a network-attached file system (NFS).

Type: Non-Streaming | TLS Support: N/A | PQ Support: N/A

Configuring Cribl Edge to Output to Filesystem Destinations
​

From the top nav, click Manage, then select a Fleet to configure. Next, you have two options:

To configure via the graphical QuickConnect UI, click Routing > QuickConnect (Stream) or Collect (Edge). Next, click Add Destination at right. From the resulting drawer’s tiles, select Filesystem. Next, click either Add Destination or (if displayed) Select Existing. The resulting drawer will provide the options below.

Or, to configure via the Routing UI, click Data > Destinations (Stream) or More > Destinations (Edge). From the resulting page’s tiles or the Destinations left nav, select Filesystem. Next, click Add Destination to open a New Destination modal that provides the options below.

General Settings
​

Output ID: Enter a unique name to identify this Filesystem definition.

Output location: Final destination for the output files.

Data format: The output data format defaults to JSON. Raw and Parquet are also available. Selecting Parquet (supported only on Linux, not Windows) exposes a Parquet Settings left tab, where you must configure certain options in order to export data in Parquet format.

Optional Settings
​

Staging location: Local filesystem location in which to buffer files before compressing and moving them to the final destination. Cribl recommends that this location be stable and high-performance.

The Staging location field is not displayed or available on Cribl.Cloud-managed Edge Nodes.

Partitioning expression: JavaScript expression that defines how files are partitioned and organized. Default is date-based. If blank, Cribl Edge will fall back to the event’s __partition field value (if present); or otherwise to the root directory of the Output Location and Staging Location.

Compress: Data compression format used before moving to final destination. Defaults to gzip (recommended). This setting is not available when Data format is set to Parquet.

File name prefix expression: The output filename prefix. Must be a JavaScript expression (which can evaluate to a constant), enclosed in quotes or backticks. Defaults to CriblOut.

File name suffix expression: The output filename suffix. Must be a JavaScript expression (which can evaluate to a constant), enclosed in quotes or backticks. Defaults to `.${C.env["CRIBL_WORKER_ID"]}.${__format}${__compression === "gzip" ? ".gz" : ""}`, where __format can be json or raw, and __compression can be none or gzip.

To prevent files from being overwritten, Cribl appends a random sequence of 6 characters to the end of their names. File name prefix and suffix expressions do not bypass this behavior.

For example, if you set the File name prefix expression to CriblExec and set the File name suffix expression to .csv, the file name might display as CriblExec-adPRWM.csv with adPRWM appended.

Backpressure Behavior: Select whether to block or drop events when all receivers are exerting backpressure. (Causes might include an accumulation of too many files needing to be closed.) Defaults to Block.

Tags: Optionally, add tags that you can use to filter and group Destinations in Cribl Edge’s Manage Destinations page. These tags aren’t added to processed events. Use a tab or hard return between (arbitrary) tag names.

Processing Settings
​

Post‑Processing
​

Pipeline: Pipeline to process data before sending the data out using this output.

System fields: A list of fields to automatically add to events that use this output. By default, includes cribl_pipe (identifying the Cribl Edge Pipeline that processed the event). Supports wildcards. Other options include:

  • cribl_host – Cribl Edge Node that processed the event.
  • cribl_input – Cribl Edge Source that processed the event.
  • cribl_output – Cribl Edge Destination that processed the event.
  • cribl_route – Cribl Edge Route (or QuickConnect) that processed the event.
  • cribl_wp – Cribl Edge Worker Process that processed the event.

Parquet Settings
​

To write out Parquet files, note that:

  • On Linux, you can use the Cribl Edge CLI’s parquet command to view a Parquet file, its metadata, or its schema.
  • Cribl Edge Workers support Parquet only when running on Linux, not on Windows.
  • See Working with Parquet for pointers on how to avoid problems such as data mismatches.

Automatic schema: Toggle on to automatically generate a Parquet schema based on the events of each Parquet file that Cribl Edge writes. When toggled off (the default), exposes the following additional field:

  • Parquet schema: Select a schema from the drop-down.

If you need to modify a schema or add a new one, follow the instructions in our Parquet Schemas topic. These steps will propagate the freshest schema back to this drop-down.

Parquet version: Determines which data types are supported, and how they are represented. Defaults to 2.6; 2.4 and 1.0 are also available.

Data page version: Serialization format for data pages. Defaults to V2. If your toolchain includes a Parquet reader that does not support V2, use V1.

Group row limit: The number of rows that every group will contain. The final group can contain a smaller number of rows. Defaults to 10000.

Page size: Set the target memory size for page segments. Generally, set lower values to improve reading speed, or set higher values to improve compression. Value must be a positive integer smaller than the Row group size value, with appropriate units. Defaults to 1 MB.

Log invalid rows: Toggle to Yes to output up to 20 unique rows that were skipped due to data format mismatch. Log level must be set to debug for output to be visible.

Write statistics: Leave toggled on (the default) if you have Parquet tools configured to view statistics – these profile an entire file in terms of minimum/maximum values within data, numbers of nulls, etc.

Write page indexes: Leave toggled on (the default) if your Parquet reader uses statistics from Page Indexes to enable page skipping. One Page Index contains statistics for one data page.

Write page checksum: Toggle on if you have configured Parquet tools to verify data integrity using the checksums of Parquet pages.

Metadata (optional): The metadata of files the Destination writes will include the properties you add here as key-value pairs. For example, one way to tag events as belonging to the OCSF category for security findings would be to set Key to OCSF Event Class and Value to 2001.

Advanced Settings
​

Max file size (MB): Maximum uncompressed output file size. Files of this size will be closed and moved to final output location. Defaults to 32.

Max file open time (sec): Maximum amount of time to write to a file. Files open for longer than this will be closed and moved to final output location. Defaults to 300.

Max file idle time (sec): Maximum amount of time to keep inactive files open. Files open for longer than this will be closed and moved to final output location. Defaults to 30.

Max open files: Maximum number of files to keep open concurrently. When exceeded, the oldest open files will be closed and moved to final output location. Defaults to 100.

Cribl Edge will close files when either of the Max file size (MB) or the Max file open time (sec) conditions are met.

Add Output ID: When set to Yes (the default), adds the Output ID field’s value to the staging location’s file path. This ensures that each Destination’s logs will write to its own bucket.

For a Destination originally configured in a Cribl Edge version below 2.4.0, the Add Output ID behavior will be switched off on the backend, regardless of this toggle’s state. This is so that upon Cribl Edge upgrade and restart, any files pending in the original staging directory will not be lost. To enable this option for such Destinations, Cribl’s recommended migration path is:

  • Clone the Destination.
  • Where Routes reference the original Destination, redirect them to instead reference the new, cloned Destination.

This way, the original Destination will process pending files (after an idle timeout), and the new, cloned Destination will process newly arriving events with Add output ID enabled.

Remove staging dirs: Toggle to Yes to delete empty staging directories after moving files. This prevents the proliferation of orphaned empty directories. When enabled, exposes this additional option:

  • Staging cleanup period: How often (in seconds) to delete empty directories when Remove staging dirs is enabled. Defaults to 300 seconds (every 5 minutes). Minimum configurable interval is 10 seconds; maximum is 86400 seconds (every 24 hours).

Environment: If you’re using GitOps, optionally use this field to specify a single Git branch on which to enable this configuration. If empty, the config will be enabled everywhere.

Internal Fields
​

Cribl Edge uses a set of internal fields to assist in forwarding data to a Destination.

Field for this Destination:

  • __partition

To export events from an intermediate stage within a Pipeline to a file, see the Tee Function.