Configure Cribl Stream to Output to Prometheus

​

1. On the top bar, select Products, and then select Cribl Stream. Under Worker Groups, select a Worker Group. Next, you have two options:
   • To configure via QuickConnect, navigate to Routing > QuickConnect (Stream) or Collect (Edge). Select Add Destination and select the Destination you want from the list, choosing either Select Existing or Add New.
   • To configure via the Routes, select Data > Destinations or More > Destinations (Edge). Select the Destination you want. Next, select Add Destination.
2. In the New Destination modal, configure the following under General Settings:
   • Output ID: Enter a unique name to identify this Prometheus output definition. If you clone this Destination, Cribl Stream will add -CLONE to the original Output ID.
   • Description: Optionally, enter a description.
   • Remote Write URL: The endpoint to send events to, for example: http://localhost:9200/write
3. Next, you can configure the following Optional Settings:
   • Backpressure behavior: Whether to block, drop, or queue events when all receivers are exerting backpressure.
   • Tags: Optionally, add tags that you can use to filter and group Destinations on the Destinations page. These tags aren’t added to processed events. Use a tab or hard return between (arbitrary) tag names.
4. Optionally, you can adjust the Authentication, Persistent Queue, Processing, Retries, and Advanced settings outlined in the sections below.
5. Select Save, then Commit & Deploy.

Authentication

​

Select one of the following options for authentication:

• None: Don’t use authentication.

• Auth token: Use HTTP token authentication. In the resulting Token field, enter the bearer token that must be included in the HTTP authorization header.

• Auth token (text secret): This option exposes a Token (text secret) drop-down, in which you can select a stored text secret that references the bearer token described above. A Create link is available to store a new, reusable secret.

• Basic: Displays Username and Password fields for you to enter HTTP Basic authentication credentials.

• Basic (credentials secret): This option exposes a Credentials secret drop-down, in which you can select a stored text secret that references the Basic authentication credentials described above. A Create link is available to store a new, reusable secret.

Persistent Queue Settings

​

The Persistent Queue Settings tab displays when the Backpressure behavior option in General settings is set to Persistent Queue. Persistent queue buffers and preserves incoming events when a downstream Destination has an outage or experiences backpressure.

Before enabling persistent queue, learn more about persistent queue behavior and how to optimize it with your system:

• About Persistent Queues
• Optimize Destination Persistent Queues (dPQ)
• Destination Backpressure Triggers

On Cribl-managed Cloud Workers (with an Enterprise plan), this tab exposes only the destructive Clear Persistent Queue button (described at the end of this section). A maximum queue size of 1 GB disk space is automatically allocated per PQ‑enabled Destination, per Worker Process. The 1 GB limit is on outbound uncompressed data, and no compression is applied to the queue.

This limit is not configurable. If the queue fills up, Cribl Stream/Edge will block outbound data. To configure the queue size, compression, queue-full fallback behavior, and other options below, use a hybrid Group.

Mode: Use this menu to select when Cribl Stream/Edge engages the persistent queue in response to backpressure events from this Destination. The options are:

If a Worker/Edge Node starts with an invalid Mode setting, it automatically switches to Error mode. This might happen if the Worker/Edge Node is running a version that does not support other modes (older than 4.9.0), or if it encounters a nonexistent value in YAML configuration files.

Max file size: The maximum data volume to store in each queue file before closing it. Enter a numeral with units of KB, MB, etc. Defaults to 1 MB.

Max queue size: The maximum amount of disk space that the queue can consume on each Worker Process. When the queue reaches this limit, the Destination stops queueing data and applies the Queue‑full behavior. Defaults to 5 GB. This field accepts positive numbers with units of KB, MB, GB, and so on. You can set it as high as 1 TB, unless you’ve configured a different Worker Process PQ size limit on the Group Settings/Fleet Settings page.

Queue file path: The location for the persistent queue files. Defaults to $CRIBL_HOME/state/queues. Cribl Stream/Edge will append /<worker‑id>/<output‑id> to this value.

Compression: Set the codec to use when compressing the persisted data after closing a file. Defaults to None. Gzip is also available.

Queue-full behavior: Whether to block or drop events when the queue begins to exert backpressure. A queue begins to exert backpressure when the disk is low or at full capacity. This setting has two options:

• Block: The output will refuse to accept new data until the receiver is ready. The system will return block signals back to the sender.
• Drop new data: Discard all new events until the backpressure event has resolved and the receiver is ready.

Strict ordering: Toggle on (default) to enable FIFO (first in, first out) event forwarding, ensuring Cribl Stream/Edge sends earlier queued events first when receivers recover. The persistent queue flushes every 10 seconds in this mode. Toggle off to prioritize new events over queued events, configure a custom drain rate for the queue, and display this option:

• Drain rate limit (EPS): Optionally, set a throttling rate (in events per second) on writing from the queue to receivers. (The default 0 value disables throttling.) Throttling the queue drain rate can boost the throughput of new and active connections by reserving more resources for them. You can further optimize Worker startup connections and CPU load in the Group Settings/Fleet Settings > Worker Processes settings.

Clear Persistent Queue: For Cloud Enterprise only, click this button if you want to delete the files that are currently queued for delivery to this Destination. If you click this button, a confirmation modal appears. Clearing the queue frees up disk space by permanently deleting the queued data, without delivering it to downstream receivers. This button only appears after you define the Output ID.

Use the Clear Persistent Queue button with caution to avoid data loss. See Steps to Safely Disable and Clear Persistent Queues for more information.

Processing Settings

​

Post‑Processing

​

Pipeline: Pipeline or Pack to process data before sending the data out using this output.

System fields: A list of fields to automatically add to events that use this output. By default, includes cribl_host (Cribl Stream Node that processed the event) and cribl_wp (Cribl Stream Worker Process that processed the event). Supports wildcards. Other options include:

• cribl_input – Cribl Stream Source that processed the event.
• cribl_output – Cribl Stream Destination that processed the event.
• cribl_pipe – Cribl Stream Pipeline that processed the event.
• cribl_route – Cribl Stream Route (or QuickConnect) that processed the event.

Retries

​

Honor Retry-After header: Toggle on to honor a Retry-After header, provided that the header specifies a delay no longer than 180 seconds. Cribl Stream/Edge limits the delay to 180 seconds even if the Retry-After header specifies a longer delay. Any Retry-After header received takes precedence over all other options configured in the Retries section. Toggle off to ignore all Retry-After headers.

Settings for failed HTTP requests: When you want to automatically retry requests that receive particular HTTP response status codes, use these settings to list those response codes.

For any HTTP response status codes that are not explicitly configured for retries, Cribl Stream/Edge applies the following rules:

Upon receiving a response code that’s on the list, Cribl Stream/Edge first waits for a set time interval called the Pre-backoff interval and then begins retrying the request. Time between retries increases based on an exponential backoff algorithm whose base is the Backoff multiplier, until the backoff multiplier reaches the Backoff limit (ms). At that point, Cribl Stream/Edge continues retrying the request without increasing the time between retries any further.

If the sender (which manages the connection to the Destination) is at capacity, it will not accept any incoming events. These incoming events originate internally from a previous stage of the data flow when Destinations send outbound requests to their respective external services, and they include retry requests and new requests. Any events that were already in transit when the sender reached capacity will continue to be processed downstream.

Sender capacity is freed up when an outgoing request succeeds or encounters a non-retryable error. When the sender has available capacity again, it will resume accepting incoming events. This capacity management is influenced by the number of active connections and configured limits, such as concurrency and buffer sizes. If a Pipeline sends events faster than the Destination can process, the buffers may fill up, leading to backpressure and Sender at capacity warnings. This backpressure prevents the sender from accepting additional requests until capacity is restored.

By default, this Destination has no response codes configured for automatic retries. For each response code you want to add to the list, select Add Setting and configure the following settings:

• HTTP status code: A response code that indicates a failed request, for example 429 (Too Many Requests) or 503 (Service Unavailable).
• Pre-backoff interval (ms): The amount of time to wait before beginning retries, in milliseconds. Defaults to 1000 (one second).
• Backoff multiplier: The base for the exponential backoff algorithm. A value of 2 (the default) means that Cribl Stream/Edge will retry after 2 seconds, then 4 seconds, then 8 seconds, and so on.
• Backoff limit (ms): The maximum backoff interval Cribl Stream/Edge should apply for its final retry, in milliseconds. Default (and minimum) is 10,000 (10 seconds); maximum is 180,000 (180 seconds, or 3 minutes).

Retry timed-out HTTP requests: Toggle on to automatically retry requests that have timed out and display the following settings for configuring retry behavior:

• Pre-backoff interval (ms): The amount of time to wait before beginning retries, in milliseconds. Defaults to 1000 (one second).
• Backoff multiplier: The base for the exponential backoff algorithm. A value of 2 (the default) means that Cribl Stream/Edge will retry after 2 seconds, then 4 seconds, then 8 seconds, and so on.
• Backoff limit (ms): The maximum backoff interval Cribl Stream/Edge should apply for its final retry, in milliseconds. Default (and minimum) is 10,000 (10 seconds); maximum is 180,000 (180 seconds, or 3 minutes).

Advanced Settings

​

Validate server certs: Reject certificates that are not authorized by a trusted CA (for example, the system’s CA). Defaults to toggled on.

Round-robin DNS: Toggle on to enable round-robin DNS lookup across multiple IP addresses, IPv4 and IPv6. When a DNS server resolves a Fully Qualified Domain Name (FQDN) to multiple IP addresses, Cribl Stream will sequentially use each address in the order they are returned by the DNS server for subsequent connection attempts.

Request timeout: Amount of time (in seconds) to wait for a request to complete before aborting it. Defaults to 30.

Request concurrency: Maximum number of concurrent requests per Worker Process. When Cribl Stream hits this limit, it begins throttling traffic to the downstream service. Defaults to 5. Minimum: 1. Maximum: 32.

Max body size (KB): Maximum size of the request body before compression. Defaults to 4096 KB. The actual request body size might exceed the specified value because the Destination adds bytes when it writes to the downstream receiver. Cribl recommends that you experiment with the Max body size value until downstream receivers reliably accept all events.

Max events per request: Maximum number of events to include in the request body. The 0 default allows unlimited events.

Flush period (sec): Maximum time between requests. Low values could cause the payload size to be smaller than its configured maximum. Defaults to 1.

Extra HTTP headers: Name-value pairs to pass as additional HTTP headers. Values will be sent encrypted.

Metric renaming expression: A JavaScript expression that can be used to rename metrics. The default expression – name.replace(/\\./g, \'_\') – replaces all . characters in a metric’s name with the Prometheus-supported _ character. Use the name global variable to access the metric’s name. You can access event fields’ values via __e.<fieldName>.

Send metadata: Whether to generate and send metrics’ metadata (type and metricFamilyName) along with the metrics. Toggling on displays this additional field:

• Metadata flush period (sec): How frequently metrics metadata is sent out. Value must at least equal the base Flush period (sec). (In other words, metadata cannot be flushed on a shorter interval.) Defaults to 60 seconds.

Failed request logging mode: Use this drop-down to determine which data should be logged when a request fails. Select among None (the default), Payload, or Payload + Headers. With this last option, Cribl Stream will redact all headers, except non-sensitive headers that you declare below in Safe headers.

Safe headers: Add headers to declare them as safe to log in plaintext. (Sensitive headers such as authorization will always be redacted, even if listed here.) Use a tab or hard return to separate header names.

Environment: If you’re using GitOps, optionally use this field to specify a single Git branch on which to enable this configuration. If empty, the config will be enabled everywhere.

Internal Fields

​

Cribl Stream uses a set of internal fields to assist in forwarding data to a Destination.

If an event contains the internal field __criblMetrics, Cribl Stream will send it to the HTTP endpoint as a metric event. Otherwise, Cribl Stream will drop the event.

Notes on HTTP-Based Outputs

​

• To proxy outbound HTTP/S requests, see System Proxy Configuration.

• Unlike other HTTP-based Destinations, Prometheus does not display an Advanced Settings > Compress option. The Prometheus remote_write spec assumes that payloads are snappy-compressed by default.

• Cribl Stream will attempt to use keepalives to reuse a connection for multiple requests. After two minutes of the first use, the connection will be thrown away, and a new one will be reattempted. This is to prevent sticking to a particular destination when there is a constant flow of events.

• If the server does not support keepalives (or if the server closes a pooled connection while idle), a new connection will be established for the next request.

• When resolving the Destination’s hostname, Cribl Stream will pick the first IP in the list for use in the next connection. Enable Round-robin DNS to better balance distribution of events between Prometheus cluster nodes.

Troubleshooting

​

The Destination’s configuration modal has helpful tabs for troubleshooting:

Live Data: Try capturing live data to see real-time events as they flow through the Destination. On the Live Data tab, click Start Capture to begin viewing real-time data.

Logs: Review and search the logs that provide detailed information about the delivery process, including any errors or warnings that may have occurred.

Test: Ensures that the Destination is correctly set up and reachable. Verify that sample events are sent correctly by clicking Run Test.

You can also view the Monitoring page that provides a comprehensive overview of data volume and rate, helping you identify delivery issues. Analyze the graphs showing events and bytes in/out over time.