On This Page

Home / Stream/ Integrations/ Sources/ Office 365/Office 365 Activity Source

Office 365 Activity Source

Cribl Stream supports receiving data from the Office 365 Management Activity API. This facilitates analyzing actions and events on Microsoft Entra ID, Exchange, and SharePoint, along with global auditing and Data Loss Prevention data.

Type: Pull | TLS Support: YES | Event Breaker Support: YES

TLS is enabled via the HTTPS protocol on this Source’s underlying REST API.

Prerequisites
​

You need to have a registered application with the Microsoft identity platform to provide Cribl Stream access to make requests to the Microsoft Graph API.

From the registered application, you’ll need its Application (client) ID, Directory (tenant) ID, and credentials to configure in the Cribl Stream Source.

Microsoft Permissions
​

The application representing your Cribl Stream instance needs the following application permissions to pull data. The permission Type for both must be Application – Delegated is not sufficient:

  • ActivityFeed.Read – Required for all Content Types except DLP.All.
  • ActivityFeed.ReadDlp – Required for the DLP.All Content Type.

Office 365 Subscriptions
​

Cribl Stream does not support starting/stopping Office 365 subscriptions. You can start subscriptions either via another Office 365 API client, or simply via curl commands. We document the curl command method below in Starting Content Subscriptions.

Configure Cribl Stream to Receive Data from the Activity API
​

  1. On the top bar, select Products, and then select Cribl Stream. Under Worker Groups, select a Worker Group. Next, you have two options:
    • To configure via QuickConnect, navigate to Routing > QuickConnect. Select Add Source and select the Source you want from the list, choosing either Select Existing or Add New.
    • To configure via the Routes, select Data > Sources. Select the Source you want. Next, select Add Source.
  2. In the New Source modal, configure the following under General Settings:
    • Input ID: Enter a unique name to identify this Source definition. If you clone this Source, Cribl Stream will add -CLONE to the original Input ID.
    • Description: Optionally, enter a description.
    • Tenant ID: Enter the Office 365 Azure Directory (tenant) ID.
    • App ID: Enter the Office 365 Azure Application (client) ID.
    • Subscription Plan: See Subscription Plan below.
  3. Under Authentication, select the Authentication method from the dropdown:
    • Manual: This default option provides a Client secret field, where you directly enter the required Office 365 Azure client secret.
    • Secret: This option instead exposes a Client secret (text secret) drop-down, from which you select a stored text secret to authenticate with. Click Create to configure a new secret.
  4. Next, you can configure the following Optional Settings:
    • Publisher identifier: Use in API requests as described here. If not defined, defaults to Microsoft Office 365 tenant ID.
    • Content Types: See the Content Types section below.
    • Tags: Optionally, add tags that you can use to filter and group Sources in Cribl Stream’s UI. These tags aren’t added to processed events. Use a tab or hard return between (arbitrary) tag names.
  5. Optionally, you can adjust the Processing, Retries, and Advanced settings, or Connected Destinations outlined in the sections below.
  6. Select Save, then Commit & Deploy.

Subscription Plan
​

Select the Office 365 subscription plan for your Organization. Options include:

  • Office 365 Enterprise
  • Office 365 GCC
  • Office 365 GCC High
  • Office 365 DoD

Content Types
​

Here, you can configure polling independently for the following types of audit data from the Office 365 Management Activity API:

  • Active Directory
  • Exchange
  • SharePoint
  • General: All workloads not included in the above content types
  • DLP.All: Data Loss Prevention events only, for all workloads

For each of these content types, the Content Types table provides the following controls:

Interval Description: This column is informational only.

Interval: Optionally, override the default polling interval. See About Polling Intervals below.

Log Level: Set the verbosity level to one of debug, info (the default), warn, or error.

Enabled: Toggle on for each service that you want to poll.

About Polling Intervals
​

To poll the Office 365 Management Activity API, Cribl Stream uses the Interval field’s value to establish the search date range and the cron schedule (for example: */${interval} * * * *).

Therefore, intervals set in minutes must divide evenly into 60 minutes to create a predictable schedule. Dividing 60 by intervals like 1, 2, 3, 4, 5, 6, 10, 12, 15, 20, or 60 itself yields an integer, so you can enter any of these values.

Cribl Stream will reject intervals like 23, 42, or 45, or 75 – which would yield non-integer results, meaning unpredictable schedules.

Processing Settings
​

Fields
​

In this section, you can define new fields or modify existing ones using JavaScript expressions, similar to the Eval function.

  • The Field Name can either be a new field (unique within the event) or an existing field name to modify its value.
  • The Value is a JavaScript expression (enclosed in quotes or backticks) to compute the field’s value (can be a constant). Select this field’s advanced mode icon (far right) if you’d like to open a modal where you can work with sample data and iterate on results.

This flexibility means you can:

  • Add new fields to enrich the event.
  • Modify existing fields by overwriting their values.
  • Compute logic or transformations using JavaScript expressions.

Pre-Processing
​

In this section’s Pipeline drop-down list, you can select a single existing Pipeline or Pack to process data from this input before the data is sent through the Routes.

Retries
​

Retry type: The algorithm to use when performing HTTP retries. Options include Backoff (the default), Static, and Disabled.

Initial retry interval (ms): Time interval between failed request and first retry (kickoff). Maximum allowed value is 20,000 ms (1/3 minute). A value of 0 means retry immediately until reaching the limit specified in Retry limit.

Retry limit: Maximum number of times to retry a failed HTTP request. Defaults to 5. Maximum: 20. A value of 0 means don’t retry at all.

Backoff multiplier: Base for exponential backoff. A value of 2 (default) means that Cribl Stream will retry after 2 seconds, then 4 seconds, then 8 seconds, and so on.

Retry HTTP codes: List of HTTP codes that trigger a retry. Leave empty to use the defaults (429 and 503). Cribl Stream does not retry codes in the 200 series.

Honor Retry-After header: When toggled on (the default) and the retry-after header is present, Cribl Stream honors any retry-after header that specifies a delay, up to a maximum of 20 seconds. Cribl Stream always ignores retry-after headers that specify a delay longer than 20 seconds.

  • Cribl Stream will log a warning message with the delay value retrieved from the retry-after header (converted to ms).
  • When toggled off, Cribl Stream ignores all retry-after headers.

Retry connection timeout: Toggle on to automatically retry a single connection attempt after a timeout (ETIMEDOUT) to ensure data continuity.

Retry connection reset: Toggle on to automatically retry a connection after a peer reset (ECONNRESET) to maintain data flow.

Advanced Settings
​

Ingestion lag (minutes): How far back into the past the Office 365 Activity API should look for events to retrieve. This is necessary because there can be a lag of 60 to 90 minutes (or longer) before Office 365 events become available via the API. The default value of 0 means don’t look back. When it’s very important to avoid missing events, consider running multiple overlapping jobs, as described below.

Request timeout (secs): The maximum time period for an HTTP request to complete before Cribl Stream treats it as timed out. Defaults to 300 (5 minutes). Enter 0 to disable timeout metering.

Job timeout: Maximum time the job is allowed to run (for example, 30, 45s, or 15m). Units are seconds, if not specified. Enter 0 for unlimited time. Defaults to 0.

Time to live: How long to keep the job’s artifacts on disk after job completion. This also affects how long a job is listed in Job Inspector. Defaults to 4h.

Environment: If you’re using GitOps, optionally use this field to specify a single Git branch on which to enable this configuration. If empty, the config will be enabled everywhere.

Internal Fields
​

Cribl Stream uses a set of internal fields to assist in handling of data. These “meta” fields are not part of an event, but they are accessible, and Functions can use them to make processing decisions.

Fields for this Source:

  • __collectible
  • __final
  • __inputId
  • __isBroken
  • __source

Connected Destinations
​

Select Send to Routes to enable conditional routing, filtering, and cloning of this Source’s data via the Routing table.

Select QuickConnect to send this Source’s data to one or more Destinations via independent, direct connections.

Starting Content Subscriptions
​

Content subscriptions (a different concept from the O365 subscription plans) are required in order for Cribl Stream to be able to begin retrieving O365 data. There is a separate subscription required for each Content Type. If you are using an existing Azure-registered application ID that already has subscriptions started, then you can ignore this section. But if you are:

  • Using a newly registered application ID, and therefore never had any subscriptions started, or
  • Reusing an application ID that had subscriptions started, but are currently stopped

…then you will need to use this procedure to manually start the necessary subscriptions. Follow either of the two methods below, using (respectively) PowerShell or curl.

Using PowerShell
​

This sample PowerShell script will enable all subscriptions for you. Update the appropriate variables as required:

# Create app of type Web app / API in Microsoft Entra ID, generate a Client Secret, and update the client id and client secret here
# Get the tenant GUID from Properties | Directory ID under the Microsoft Entra ID section.
$AppID = "<APP_ID>"
$ClientSecret = "<CLIENT_SECRET>"
$TenantID = "<TENANT_ID>"
$loginURL = "https://login.microsoftonline.com/"

# For $resource, use one of these endpoint values based on your subscription plan:
# * Enterprise - manage.office.com
# * GCC - manage-gcc.office.com
# * GCC High - manage.office365.us
# * DoD - manage.protection.apps.mil
$resource = "https://manage.office.com"

$body = @{grant_type="client_credentials";resource=$resource;client_id=$AppID;client_secret=$ClientSecret}
$oauth = Invoke-RestMethod -Method Post -Uri $loginURL/$TenantID/oauth2/token?api-version=1.0 -Body $body
$headerParams = @{'Authorization'="$($oauth.token_type) $($oauth.access_token)"}

Invoke-WebRequest -Headers $headerParams -Uri "$resource/api/v1.0/$TenantID/activity/feed/subscriptions/list"

Invoke-WebRequest -Method Post -Headers $headerParams -Uri "$resource/api/v1.0/$TenantID/activity/feed/subscriptions/start?contentType=Audit.AzureActiveDirectory"
Invoke-WebRequest -Method Post -Headers $headerParams -Uri "$resource/api/v1.0/$TenantID/activity/feed/subscriptions/start?contentType=Audit.Exchange"
Invoke-WebRequest -Method Post -Headers $headerParams -Uri "$resource/api/v1.0/$TenantID/activity/feed/subscriptions/start?contentType=Audit.SharePoint"
Invoke-WebRequest -Method Post -Headers $headerParams -Uri "$resource/api/v1.0/$TenantID/activity/feed/subscriptions/start?contentType=Audit.General"
Invoke-WebRequest -Method Post -Headers $headerParams -Uri "$resource/api/v1.0/$TenantID/activity/feed/subscriptions/start?contentType=DLP.All"

Using curl
​

This process requires two curl commands. You need the same information (client secret, application ID, and tenant ID) that you use to set up this Source in Cribl Stream to run these two commands. Replace those three variables as appropriate in the commands below.

The first command obtains an auth token:

curl -X POST 'https://login.windows.net/<tenantId>/oauth2/token' \
-d "client_secret=<client secret>&resource=https://manage.office.com&client_id=<app id>&grant_type=client_credentials"

The second command uses the auth token from the response to the first command to actually start the subscription:

curl -X POST 'https://manage.office.com/api/v1.0/<tenantId>/activity/feed/subscriptions/start?contentType=<content_type_name>' \
-H "Authorization: Bearer <token>" \
-d ""

Here is an example of Command #1 and the expected response:

Command #1 Example
curl -X POST 'https://login.windows.net/12345678-aaaa-4233-cccc-160c6c30154a/oauth2/token' \
-d "client_secret=abcdefghijklmnopqrstuvwxyz12345678&resource=https://manage.office.com&client_id=00000000-ffff-ffff-ffff-aaaaaaaaaaaa&grant_type=client_credentials"
Command #1 Example Response
{"token_type":"Bearer","expires_in":"3599","ext_expires_in":"3599","expires_on":"1622089429","not_before":"1622085529","resource":"https://manage.office.com","access_token":"eyJ0...longJWT...MRDvw"}

Here is an example of Command #2 and the expected response:

Command #2 Example
curl -X POST 'https://manage.office.com/api/v1.0/12345678-aaaa-4233-cccc-160c6c30154a/activity/feed/subscriptions/start?contentType=Audit.AzureActiveDirectory' \
-H "Authorization: Bearer eyJ0...longJWT...MRDvw" \
-d ""
Command #2 Example Response
{"contentType":"Audit.AzureActiveDirectory","status":"enabled","webhook":null}

Note there is no output when executing this second command with a stop operation.

You’ll need to execute the second command for each Content Type whose logs you wish to collect. Use the exact strings below to specify Content Types in that command:

  • Audit.AzureActiveDirectory
  • Audit.Exchange
  • Audit.SharePoint
  • Audit.General
  • DLP.All

How Cribl Stream Pulls Data
​

The Office 365 Activity Source retrieves data using Cribl Stream scheduled Collection jobs, which include Discover and Collection phases. The Discover phase task returns the URL of the content to collect.

In the Source’s General Settings > Content Types > Interval column, you configure the polling schedule for each Content Type independently. Each Content Type that you enable gets its own separate scheduled job.

The job scheduler spreads the Collection tasks across all available Workers. The collected content is paginated, so the collection phase might include multiple calls to fetch data.

Viewing Scheduled Jobs
​

Once you’ve configured and saved the Source, you can view the Collection jobs’ results by reopening the Source’s config modal and clicking its Job Inspector tab.

Each content type that you enabled gets its own separate scheduled job.

You can also view these jobs (among scheduled jobs for other Collectors and Sources) in the Monitoring > System > Job Inspector > Currently Scheduled tab.

Mitigating Stuck-Job Problems
​

Occasionally, a scheduled job fails, but continues running for hours or even days, until someone intervenes and cancels it. If left alone, such a “stuck”, “orphaned,” or “zombie” job will never complete. This can cause missing events in downstream receivers, along with HTTP timeout or similar errors in Cribl Stream’s logs.

To keep stuck jobs from running excessively long:

  • First, try setting Advanced > Timeout (secs) to a duration shorter than the default of 300 seconds (5 minutes).
  • If adjusting Timeout (secs) does not fix the problem, try the global setting Job Timeout – whose default of 0 allows a job to run indefinitely – to a desired maximum duration. You’ll find Job Timeout among the task manifest and buffering limits.

Using these settings in tandem works like this:

  • Timeout (secs) limits the time that Cribl Stream will wait for an HTTP request to complete.
  • Then, if a job gets stuck and keeps running beyond that limit, Job Timeout can catch and terminate the job, because it monitors the overall time the job has been running.

Proxying Requests
​

If you need to proxy HTTP/S requests, see System Proxy Configuration.

Multiple Overlapping Jobs
​

You can schedule multiple Collection jobs where each job uses a different ingestion lag, for example, three different jobs with Ingestion lag set to 120 (two hours), 720 (twelve hours), and 5760 (four days), respectively.

Although this approach will collect data over partially overlapping time ranges – meaning that you’ll have duplicate events – it can improve the chances that you’ll catch “straggler” events affected by the known lag times in the Office 365 Management Activity API.

See Also
​

The Community-contributed Microsoft Office Activity & Azure Logs Pack provides sample Pipelines to parse and streamline ingested Office 365 and EntraID/Azure AD data. You can import these and adapt them to your own needs.

Troubleshooting
​

The Source’s configuration modal has helpful tabs for troubleshooting:

Live Data: Try capturing live data to see real-time events as they are ingested. On the Live Data tab, click Start Capture to begin viewing real-time data.

Logs: Review and search the logs that provide detailed information about the ingestion process, including any errors or warnings that may have occurred.

You can also view the Monitoring page that provides a comprehensive overview of data volume and rate, helping you identify ingestion issues. Analyze the graphs showing events and bytes in/out over time.

Common Issues
​

Dropping request because token invalid",“authToken”: “Bas…Njc=”
​

The specified token is invalid. Note that the above message is logged only at the debug level.