Configure Cribl Stream to Send Data to Amazon SQS

​

In Cribl Stream, configure Amazon SQS:

1. On the top bar, select Products, and then select Cribl Stream. Under Worker Groups, select a Worker Group. Next, you have two options:
   • To configure via QuickConnect, navigate to Routing > QuickConnect (Stream) or Collect (Edge). Select Add Destination and select the Destination you want from the list, choosing either Select Existing or Add New.
   • To configure via the Routes, select Data > Destinations or More > Destinations (Edge). Select the Destination you want. Next, select Add Destination.
2. In the New Destination modal, configure the following under General Settings:
   • Output ID: Enter a unique name to identify this SQS Destination.
   • Description: Optionally, enter a description.
   • Queue name: The name, URL, or ARN of the SQS queue to send events to. This value must be a JavaScript expression (which can evaluate to a constant), enclosed in single quotes, double quotes, or backticks. To specify a non-AWS URL, use the format: '{url}/<queueName>'. (For example, ':port/<myQueueName>'.)
   • Queue type: The queue type used (or created). Defaults to Standard. FIFO (First In, First Out) is the other option.
3. Next, you can configure the following Optional Settings:
   • Message group ID: This parameter applies only to queues of type FIFO. Enter the tag that specifies that a message belongs to a specific message group. (Messages belonging to the same message group are processed in FIFO order.) Defaults to cribl. Use event field __messageGroupId to override this value.
   • Create queue: Specifies whether to create the queue if it does not exist. Defaults to Yes.
   • Region: Region where SQS queue is located.
   • Backpressure behavior: Select whether to block, drop, or queue events when all receivers are exerting backpressure. (Causes might include a broken or denied connection, or a rate limiter.) Defaults to Block. When this field is set to queue, see Persistent Queue Settings for details.
   • Tags: Optionally, add tags that you can use to filter and group Destinations on the Destinations page. These tags aren’t added to processed events. Use a tab or hard return between (arbitrary) tag names.
4. Optionally, configure any Authentication, Assume Role, Processing, and Advanced settings outlined in the sections below.
5. Select Save, then Commit & Deploy.

Persistent Queue Settings

​

The Persistent Queue Settings tab displays when the Backpressure behavior option in General settings is set to Persistent Queue. Persistent queue buffers and preserves incoming events when a downstream Destination has an outage or experiences backpressure.

Before enabling persistent queue, learn more about persistent queue behavior and how to optimize it with your system:

• About Persistent Queues
• Optimize Destination Persistent Queues (dPQ)
• Destination Backpressure Triggers

On Cribl-managed Cloud Workers (with an Enterprise plan), this tab exposes only the destructive Clear Persistent Queue button (described at the end of this section). A maximum queue size of 1 GB disk space is automatically allocated per PQ‑enabled Destination, per Worker Process. The 1 GB limit is on outbound uncompressed data, and no compression is applied to the queue.

This limit is not configurable. If the queue fills up, Cribl Stream/Edge will block outbound data. To configure the queue size, compression, queue-full fallback behavior, and other options below, use a hybrid Group.

Mode: Use this menu to select when Cribl Stream/Edge engages the persistent queue in response to backpressure events from this Destination. The options are:

If a Worker/Edge Node starts with an invalid Mode setting, it automatically switches to Error mode. This might happen if the Worker/Edge Node is running a version that does not support other modes (older than 4.9.0), or if it encounters a nonexistent value in YAML configuration files.

Max file size: The maximum data volume to store in each queue file before closing it. Enter a numeral with units of KB, MB, etc. Defaults to 1 MB.

Max queue size: The maximum amount of disk space that the queue can consume on each Worker Process. When the queue reaches this limit, the Destination stops queueing data and applies the Queue‑full behavior. Defaults to 5 GB. This field accepts positive numbers with units of KB, MB, GB, and so on. You can set it as high as 1 TB, unless you’ve configured a different Max PQ size per Worker Process on the Group Settings/Fleet Settings page.

Queue file path: The location for the persistent queue files. Defaults to $CRIBL_HOME/state/queues. Cribl Stream/Edge will append /<worker‑id>/<output‑id> to this value.

Compression: Set the codec to use when compressing the persisted data after closing a file. Defaults to None. Gzip is also available.

Queue-full behavior: Whether to block or drop events when the queue begins to exert backpressure. A queue begins to exert backpressure when the disk is low or at full capacity. This setting has two options:

• Block: The output will refuse to accept new data until the receiver is ready. The system will return block signals back to the sender.
• Drop new data: Discard all new events until the backpressure event has resolved and the receiver is ready.

Backpressure duration Limit: When Mode is set to Backpressure, this setting controls how long to wait during network slowdowns before activating queues. A shorter duration enhances critical data loss prevention, while a longer duration helps avoid unnecessary queue transitions in environments with frequent, brief network fluctuations. The default value is 30 seconds.

Strict ordering: By default, the Yes setting enables FIFO (first in, first out) event forwarding, ensuring Cribl Stream/Edge sends earlier queued events first when receivers recover. The persistent queue flushes every 10 seconds in this mode. Changing the setting to No allows you to prioritize new events over queued events and configure a custom drain rate for the queue. When No is enabled, this option appears:

• Drain rate limit (EPS): Optionally, set a throttling rate (in events per second) on writing from the queue to receivers. (The default 0 value disables throttling.) Throttling the queue drain rate can boost the throughput of new and active connections by reserving more resources for them. You can further optimize Worker startup connections and CPU load in the Group Settings/Fleet Settings > Worker Processes settings.

Clear Persistent Queue: For Cloud Enterprise only, click this button if you want to delete the files that are currently queued for delivery to this Destination. If you click this button, a confirmation modal appears. Clearing the queue frees up disk space by permanently deleting the queued data, without delivering it to downstream receivers. This button only appears after you define the Output ID.

Use the Clear Persistent Queue button with caution to avoid data loss. See Steps to Safely Disable and Clear Persistent Queues for more information.

Authentication

​

Use the Authentication method drop-down to select an AWS authentication method.

Auto: This default option uses the AWS SDK for JavaScript to automatically obtain credentials in the following order of attempts:

1. IAM Roles for Amazon EC2: Loaded from AWS Identity and Access Management (IAM) roles attached to an EC2 instance.
2. Shared Credentials File: Loaded from the shared credentials file (~/.aws/credentials).
3. Environment Variables: Loaded from environment variables AWS_ACCESS_KEY_ID and AWS_SECRET_ACCESS_KEY.
4. JSON File on Disk: Loaded from a JSON file on disk.
5. Other Credential-Provider Classes: Other credential-provider classes provided by the AWS SDK for JavaScript.

The Auto method works both when running on AWS and in other environments where the necessary credentials are available through one of the above methods.

SSO Providers

​

When using the auto authentication method, you can leverage SSO providers like SAML and Okta to issue temporary credentials. These credentials should be set in the environment variables AWS_ACCESS_KEY_ID and AWS_SECRET_ACCESS_KEY. The AWS SDK will then use these environment variables to authenticate.

Manual: If not running on AWS, you can select this option to enter a static set of user-associated IAM credentials (your access key and secret key) directly or by reference. This is useful for Workers not in an AWS VPC, for example, those running a private cloud. The Manual option exposes these corresponding additional fields:

• Access key: Enter your AWS access key. If not present, will fall back to the env.AWS_ACCESS_KEY_ID environment variable, or to the metadata endpoint for IAM role credentials.

• Secret key: Enter your AWS secret key. If not present, will fall back to the env.AWS_SECRET_ACCESS_KEY environment variable, or to the metadata endpoint for IAM credentials.

Secret: If not running on AWS, you can select this option to supply a stored secret that references an AWS access key and secret key. The Secret option exposes this additional field:

• Secret key pair: Use the drop-down to select an API key/secret key pair that you’ve configured in Cribl Stream’s secrets manager. A Create link is available to store a new, reusable secret.

Assume Role

​

When using Assume Role to access resources in a different region than Cribl Stream, you can target the AWS Security Token Service (STS) endpoint specific to that region by using the CRIBL_AWS_STS_REGION environment variable on your Worker Node. Setting an invalid region results in a fallback to the global STS endpoint.

Enable for SQS: Toggle to Yes to use Assume Role credentials to access SQS.

AWS account ID: Enter the SQS queue owner’s AWS account ID. Leave empty if the SQS queue is in the same AWS account where this Cribl Stream instance is located.

AssumeRole ARN: Enter the Amazon Resource Name (ARN) of the role to assume.

External ID: Enter the External ID to use when assuming role.

Duration (seconds): Duration of the Assumed Role’s session, in seconds. Minimum is 900 (15 minutes). Maximum is 43200 (12 hours). Defaults to 3600 (1 hour).

Processing Settings

​

Post‑Processing

​

Pipeline: Pipeline to process data before sending the data out using this output.

System fields: A list of fields to automatically add to events that use this output. By default, includes cribl_pipe (identifying the Cribl Stream Pipeline that processed the event). Supports wildcards. Other options include:

• cribl_host – Cribl Stream Node that processed the event.
• cribl_input – Cribl Stream Source that processed the event.
• cribl_output – Cribl Stream Destination that processed the event.
• cribl_route – Cribl Stream Route (or QuickConnect) that processed the event.
• cribl_wp – Cribl Stream Worker Process that processed the event.

Advanced Settings

​

Endpoint: SQS service endpoint. If empty, the endpoint will be automatically constructed from the region.

Signature version: Signature version to use for signing SQS requests. Defaults to v4.

Max queue size: Maximum number of queued batches before blocking. Defaults to 100.

Max record size (KB): Maximum size of each individual record. Per the SQS spec, the maximum allowed value is 256 KB. (the default).

Flush period (sec): Maximum time between requests. Low settings could cause the payload size to be smaller than its configured maximum. Defaults to 1.

Max concurrent requests: The maximum number of in-progress API requests before backpressure is applied. Defaults to 10.

Reuse connections: Whether to reuse connections between requests. The default setting (Yes) can improve performance.

Reject unauthorized certificates: Whether to accept certificates that cannot be verified against a valid Certificate Authority (for example, self-signed certificates). Defaults to Yes.

Environment: If you’re using GitOps, optionally use this field to specify a single Git branch on which to enable this configuration. If empty, the config will be enabled everywhere.

SQS Permissions

​

The following permissions are needed to write to an SQS queue:

• sqs:ListQueues
• sqs:SendMessage
• sqs:SendMessageBatch
• sqs:CreateQueue
• sqs:GetQueueAttributes
• sqs:SetQueueAttributes
• sqs:GetQueueUrl

Internal Fields

​

Cribl Stream uses a set of internal fields to assist in handling of data. These “meta” fields are not part of an event, but they are accessible, and functions can use them to make processing decisions.

Fields for this Destination:

• __messageGroupId
• __sqsMsgAttrs
• __sqsSysAttrs

Proxying Requests

​

If you need to proxy HTTP/S requests, see System Proxy Configuration.

Troubleshooting

​

The Destination’s configuration modal has helpful tabs for troubleshooting:

Live Data: Try capturing live data to see real-time events as they flow through the Destination. On the Live Data tab, click Start Capture to begin viewing real-time data.

Logs: Review and search the logs that provide detailed information about the delivery process, including any errors or warnings that may have occurred.

Test: Ensures that the Destination is correctly set up and reachable. Verify that sample events are sent correctly by clicking Run Test.

You can also view the Monitoring page that provides a comprehensive overview of data volume and rate, helping you identify delivery issues. Analyze the graphs showing events and bytes in/out over time.